How to Make a Metal Bed Frame Stop Squeaking - Described in 5 Ways (2023)

Home ImprovementResources

22 0

Beds are expensive, and not everyone can afford to buy a new one when the old one starts squeaking. In this article, you will learn how to make a metal bed frame stop squeaking without spending any money. Keep reading for tips and tricks to help you manage this annoying problem!

How to Make a Metal Bed Frame Stop Squeaking - Described in 5 Ways (1)

Metal beds are sturdy and reliable, but they can often start squeaking after a while. This is usually caused by the metal rubbing against itself, and it can be very frustrating for people trying to get a good night’s sleep. If your bed is making noise, don’t worry – there are several things you can do to stop the squeaking. Many of these solutions involve using common household items, so you probably already have everything you need.

What are Squeaky Beds?

Squeaky beds are often the source of much frustration for sleepy homeowners. The creaks and groans emanating from the bed frame can make it difficult to fall asleep, and the constant noise can be a significant annoyance. At the same time, several potential causes of squeaky beds, the most common culprit is loose hardware.

Over time, bolts and screws can loosen, causing the bed frame to rub against itself and produce a squeaking sound. Other causes of squeaky beds include loose joints, worn-out glides, and poorly fitting sheets.

A Detailed Guide on How to Make a Metal Bed Frame Stop Squeaking

Way 1: Tighten the Joints

Metal bed frames can make noise when the joints loosen over time. Tightening the joints can help to stop the frame from squeaking. If the bed frame is made of metal tubing or metal connectors, it’s possible to tighten the screws or bolts that hold everything together. This will create a tighter fit and stop the metal from rattling and squeaking. You may need a screwdriver or wrench to do this.

How to Make a Metal Bed Frame Stop Squeaking - Described in 5 Ways (2)

To tighten the screws or bolts, locate the joint making the noise. Next, use a screwdriver or wrench to tighten the screws or bolts until snug. Do not over-tighten them, as this could damage the frame.

Way 2: Lubricants

Lubricants are substances that reduce friction between two surfaces. They can be liquids, solids, or gases. Any household lubricant can work to silence a squeaking metal bed frame. This includes silicone sprays, WD-40, or cooking oils like olive oil or vegetable shortening.

However, you must test the lubricant on an inconspicuous spot of your bed frame before spraying or rubbing it all over the entire frame. Some lubricants may cause discoloration or finish damage to certain types of metal.

Start with a silicone spray if you’re unsure which lubricant to try. It’s generally safe for most finishes and is widely available at hardware stores.

(Video) Fix A Squeaky Bed Frame

Spray the lubricant onto a soft cloth and then apply it to the frame. Be sure to get into all the nooks and crannies. Let the lubricant sit for several minutes, then wipe away any excess with a clean cloth.

If your bed frame is still squeaking after applying the lubricant, try using WD-40. It’s a heavier-duty lubricant that is especially effective at stopping metal-on-metal squeaks. Just spray it onto a cloth and apply it to the frame the same way you did with the silicone spray.

If you’re having trouble reaching some of the harder-to-reach spots on your bed frame, try using a household cleaner like vegetable shortening. It has a thick consistency that will help it stay in place, and it’s safe for most metal finishes. Apply it in the same way as you did with the other lubricants.

How to Make a Metal Bed Frame Stop Squeaking - Described in 5 Ways (3)

Way 3: Use Wax

You will need carnauba wax. This is the best kind to use because it is a natural wax, and it will help reduce the noise the bed frame is making.

Put a small amount of wax onto a cloth and rub it into the joints of your bed frame. You only need to do this once, and it should stop the squeaking straight away. If there is still some noise after doing this, then you can repeat the process until the noise has gone completely.

Applying a coat of wax to your metal bed frame will help quiet the squeaks. Be sure to apply it evenly and let it dry completely before using the bed. This is a great way to fix a squeaky bed frame quickly and easily.

Use caution when working with any wax, as it can be a fire hazard if not used properly. Ensure you have plenty of ventilation when melting the wax and avoid coming into contact with the hot wax.

Way 4: Add Extra Padding

Padding is a material placed between two objects to prevent them from making noise when they move against each other. In the case of a metal bed frame, adding padding will help stop it from squeaking as you move around in bed.

There are a few different ways to add padding to your bed frame. One option is to purchase some foam pipe insulation and cut it into strips that will fit around the frame. You can also use batting or even old towels. If you have a particularly noisy frame, you may need to use more than one layer of padding to eliminate the squeaks.

How to Make a Metal Bed Frame Stop Squeaking - Described in 5 Ways (4)

Another way to pad your bed frame is by using felt pads. These are small discs made of felt that can be attached to the feet of the frame. They will help to muffle any noise that is caused by movement. Felt pads are a great option if you have a wood frame, as they will not damage the surface.

Both foam insulation and felt pads are available at most home improvement stores. Make sure to measure your bed frame before purchasing any materials to get the right size.

If you follow one of these methods, your metal bed frame should be reasonable as new and no longer make any annoying squeaking noises!

Way 5: Adjust the Bed Frame

If your bed frame is still squeaking after trying all of the above methods, it may be out of adjustment. This means that the frame is not level and scraps against the floor as you move around in bed. To fix this, you will need to adjust the frame to level it.

First, remove the mattress and box spring from the bed frame. Once they are removed, you should be able to see the screws that hold the frame together. Loosen these screws until the frame is level. Once it is level, re-tighten the screws.

(Video) How to Fix a Squeaky Bed

Once the frame is adjusted, put the mattress and box spring back on it. If there are still some squeaks, you can try using a piece of wood to raise the frame until it is level. This will help to prevent any further scraping against the floor.

If you are still having problems with your bed frame after trying these methods, it may be time to replace it. Talk to a home improvement store associate about getting a new frame that will not make any noise.

Squeaky bed frames can be extremely annoying, but with these five methods, you should be able to fix the problem in no time! Method 1 is our favorite because it is the quickest and easiest way to stop the noise. If you have a particularly noisy frame, you may need to use more than one method to eliminate the squeaks. These ways will help in how to make a metal bed frame stop squeaking. Good luck!

How to Make a Metal Bed Frame Stop Squeaking - Described in 5 Ways (5)

Why Does My Metal Bed Frame Creak?

There are a few reasons why your metal bed frame may be creaking. One possibility is that the frame is not correctly aligned. This can happen if you move the bed without taking the time to disassemble it first. Another possibility is that the bed frame is loose in one or more places.

Loose screws or bolts can cause this, and it can be easily fixed by tightening everything up. Finally, the frame may be simply old and in need of replacement. Over time, metal bed frames can develop cracks and breaks, leading to creaking noises. If your bed frame shows signs of wear and tear, it’s probably time to invest in a new one.

Can a Metal Bed Frame Break?

It is not uncommon for people to ask if metal bed frames can break. After all, metal is typically thought of as being strong and durable. However, while it is true that metal bed frames are usually quite sturdy, several factors can cause them to break. For instance, if the frame is a thin or weak metal, it may be more susceptible to breaking.

In addition, if the frame is not adequately supported, it may also be more likely to break. Of course, even if a metal bed frame is made of strong metal and is well-supported, it can still break under the right circumstances. For instance, if there is a lot of weight on the frame, or if it experiences a sudden impact, it may break. So, while metal bed frames are generally quite sturdy, they can still break under certain circumstances.


If you’ve tried the ways above and your metal bed frame is still squeaking, it may be time to bring in a professional. Bed frame repair professionals have the tools and expertise to diagnose the problem and fix it quickly and efficiently so that you can get back to a good night’s sleep. We hope you have gone through the article on how to make a metal bed frame stop squeaking.

How to Make a Metal Bed Frame Stop Squeaking - Described in 5 Ways (6)


How to Plug a Bathtub Without a Stopper

(Video) How to Stop a Box Spring from Squeaking

How to Make a Metal Bed Frame Stop Squeaking - Described in 5 Ways (7)


How to Get Rid of Static in Bed Sheets

Related Articles

Added to wishlistRemoved from wishlist 0

How to Calculate Kitchen Cabinet Square Footage

(Video) GreenForest Bed Frame Queen Size No Squeaky Metal Platform Bed with Headboard Non Slip Steel Slat Su

Added to wishlistRemoved from wishlist 0

How to Fill Gap Between Fridge and Cabinet

Added to wishlistRemoved from wishlist 0

How to Reinforce Bookshelf

Added to wishlistRemoved from wishlist 0

(Video) GreenForest heavy duty bed frame queen no squeaky metal bed

How to Lower PH in Aquarium With Vinegar


1. 365 Days of DIY How to Reinforce bed frame
2. How To Raise Your Bed
3. Installing a Knickerbocker Bedbeam on an antique king bed frame to make it less squeaky
(Usually Useful)
4. Do I need a Box Spring? - Bunkie Board vs Box Spring
5. Metal Bed Frame Repair
6. How To Clean Iron Bottom - EASY
(Hacked Life RP)


Top Articles
Latest Posts
Article information

Author: Neely Ledner

Last Updated: 28/09/2023

Views: 5989

Rating: 4.1 / 5 (62 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.