The bed creaks what to do and how to fix it yourself (2023)

Any furniture wears out, deteriorates. A wooden bed is no exception, even if it is made of high quality materials. After a while, you can notice that the bed is creaking, what should be done in this case to eliminate an unpleasant sound? First you need to establish the cause of the creak, and only after that take action.

Common causes

You can get rid of the creak of a wooden bed if you precisely determine the cause of its occurrence. The most common among them are:

• Fasteners, connecting elements - over time, they may become loose, break;
• The rack base of the bed - the design creaks due to the contact of wooden parts or the breakdown of fasteners;
• Mattress - the sound is not made by the mattress itself, but by its springs. Under weight, they bend, deform, which leads to their contact. The mattress can also produce unpleasant sounds from friction against the frame or base. Often this happens because he is simply unevenly lying;
• Legs - from the fact that the bed is uneven, an unpleasant sound may appear from touching them on the floor. Furniture dries up, gaps form. The legs begin to come into contact with the frame, making an unpleasant sound.

How to detect a bed indiscriminately

Why the bed creaks, it will be much easier to determine if two people will immediately search for the cause. One of them will loosen the furniture, and the other will listen. The cause of the creak, as has already been clarified, may be different furniture elements, therefore, in order not to completely disassemble the structure, you can resort to some of the methods described below. The bed creaks - what to do:

1. First remove the mattress. Get the base. It is a plank located across the bed under the mattress;
2. Put the mattress on the floor, check. The creak is caused by springs located inside. Stand on the mattress, walk on it, sit down. If there is no creaking sound, then the problem is different;
3. The mattress sometimes rubs against the bed itself, in contact with the walls of the frame. Put it back and check. Stagger or sit down, a creak should appear;
4. Press on the orthopedic base, pump slightly. The source can be wooden lamellas, not fixed correctly or if cracks or chips have formed on them. Often, on inexpensive bed models, self-tapping screws or screws used to fix the lamella to the base cause a creak;
5. Sometimes the reason is not in the base, but in the frame. Then you need to carefully check the entire bed. Swing its different sections.Perhaps the whole structure has been shaken and additional fasteners will be required to strengthen the strength of the frame;
6. Lifting beds can also creak. An unpleasant sound appears in the mechanism itself. Repairing it is quite complicated, so it is recommended to replace it;
7. The legs also sometimes make an unpleasant sound. It appears due to their contact with the floor when the bed is uneven. Basically, this can be determined by looking at the legs of the bed. Most likely, some of them will not reach the floor. In this case, you can put special stands under them. It is also found that the legs do not completely touch the bed frame, rotate and creak;
8. Check support strips. They are necessary for installing an orthopedic base and mattress. They are attached to the base and come in wood or metal. It is necessary to press on the slats and listen if a creak appears or not.

Check if the floor creaks. There are times when a berth is located on a wooden floor. Over time, the boards begin to creak, and it seems that the sound comes from the bed. The berth should be moved away and checked to make unpleasant sounds elsewhere.

Squeak removal

When a wooden bed creaks, it can bring many inconveniences. During sleep or rest, unpleasant sounds, friction irritate, worsen mood. Hardly anyone would like squeaky beds. Determining the exact source of the sound will help you choose the method to fix the problem, so that sleep and relaxation will become pleasant and comfortable.

The following are some simple ways to remove the creak of a wooden bed:

1. It is necessary to take a pillow or other thing, place it between the headboard and the wall. Squeaking due to the moving head will stop, as it will be fixed in one position;
2. The second option is to press the berth on both sides with other furniture. For example, a dresser, a curbstone, a padded stool. The parted bed in this case will stand firmly and not stagger.

If the simplest ways to eliminate squeaking did not fit, it is necessary to approach the solution of the problem more specifically. You need to get rid of squeaking depending on the parts of the bed. The mattress, headboard, frame and base can creak.

Mattress

Sometimes the mattress is just unevenly lying on the bed, try to put it correctly. The reason also depends on the type of mattress. Their filling is polymer or spring. Inexpensive models make a creak due to the contact of the springs. Only mattress replacement will help get rid of the problem.

Dear models are arranged in such a way that each spring is located separately in the case, which performs a protective water-repellent function, prevents friction of the springs. If an expensive mattress creaks, it is recommended to turn it over. The load on worn-out areas will become less, the creak will stop for a while.

Polymer-filled mattresses also make unpleasant sounds. They can be associated with a violation of the tightness of individual chambers. Air flows from one camera to another, makes a characteristic sound. If the polymer mattress began to creak, it must be replaced.

Headboard

The headboard can also cause the creaking of a wooden bed. The most common loosening of the czar. A creak appears at their junction with the headboard. It is recommended to tighten all bolts, all connecting elements.

If simply lifting did not help, felt, felt or rubber pads will be required. For greater reliability, they are glued. In this case, it is necessary to take into account the fact that it will become more difficult to disassemble the bed.

Frame

A wooden bed creaks, as a rule, after several years of operation. This is due to the fact that the house or apartment has dry air.It causes the wood to dry out. Individual elements dry out and small gaps appear between them. Thus, the details begin to move, in contact. They are erased, gaps increase. The creak is getting louder.

The easiest way to eliminate the unpleasant sound of the bed frame is to tighten all the fasteners. This method is temporary, because after a certain period of time the details are shaken again. In this case, it is recommended to immediately strengthen the frame and prevent the appearance of squeaks.

Small gaps can be removed with special grease. They reduce wear and friction of parts. It is recommended to lubricate the bed with antifriction agents. They come in different types: pasty, aerosols, gels, sprays. How to get rid of a creaking bed at home? To do this, you need an ordinary paraffin candle or a bar of soap. Details that rub against each other must be carefully treated with a candle. This must be done until they begin to glide smoothly and smoothly. Such a tool brings only a temporary effect, so the lubricant is periodically repeated. A regular bar of soap can also help get rid of squeaking. Wooden elements are rubbed with soap in the same way as paraffin. It is worth noting that this method is not moisture resistant.

If the gaps are large and the above methods do not help, it is recommended to use additional gaskets. They come from rubber, felt and other materials. Gaskets are installed in the places of gaps, they are additionally glued.

With the help of furniture corners, you can strengthen the structural strength of the frame. In this case, the bed will not stagger and creak. In some cases, carpentry or PVA glue will be required:

1. The frame is taken apart;
2. Carefully remove dust and dirt;
3. Degrease the surfaces of individual parts;
4. Apply glue to joints, holes;
5. Connect the parts to each other, assemble the frame;
6. Leave the bed until the glue completely dries.

Grounds

How to prevent the base of the bed from creaking? In some cases, replacing wooden slats in some places helps. The orthopedic foundation takes on all the burden of the load, eventually becomes unusable, wears out. What to do in such cases:

1. First carefully inspect the lamellas. Cracks, chips may appear on them. Also, the lamellas could deform over time, and damaged parts will have to be replaced;
2. Creak of a berth due to broken lattice holders. They are also being replaced with new ones;
3. In some cases, you just need to tighten the mounts, and the creak will disappear;
4. After that, each detail is checked by gently clicking on it. The creaking elements free from fasteners, lubricate the ends. Silicone grease is suitable for this;
5. With large gaps, felt or foamed polyethylene will help;
6. Cheap models of beds do not have latent holders and lamellas are held on self-tapping screws. Under them, you need to put any soft tissue that eliminates friction.

Sometimes a wooden or metal frame creaks. It can rub against support strips. Felt pads, which are fixed to the frame, will help get rid of the squeak. You can also attach them to the support bars.

Preventative measures

What to do so that the new bed does not creak? A fairly common problem, the following recommendations will help get rid of it. You need to give preference to beds made of expensive natural wood. The most durable and durable:

• Oak - practical and durable, with a beautiful pattern, it is suitable for any interior;
• Mahogany - noble color, original appearance and high quality. Mahogany products are moisture resistant, not exposed to ultraviolet rays. Furniture emits an unobtrusive aroma that repels various insects;
• rosewood - luxurious furnishings are quite expensive. Products have exclusive qualities. Rubbing the tree a little, you can feel the delicate aroma of violets. High-quality pieces of furniture will please the owners for a long time.

Pay attention to the frame - the elements must be firmly connected, should not hang. It is better to choose a mattress with separate blocks. They are more durable and durable. Over time, it must be turned over so that the load is evenly distributed over its surface.

When installing a new bed, try to place it as evenly as possible. Uneven load on the frame and base of the bed will subsequently lead to loosening and skewing of the parts, and as a result, the creak. All fasteners must be tightened tightly so that the bed is a solid structure. More durable will be metal products. Another plus in their value. Metal beds are cheaper than wooden beds. They also look beautiful and are suitable for almost any environment. Forged beds do not creak, they look stylish and elegant.

All wooden beds begin to creak during operation. You can get rid of annoying sound at home, the main thing is to correctly determine the cause, choose the appropriate method of elimination.

Video